The left and right yaw feeders can save material utilization, and can be used to unwind, level, shift left and right, punch down, etc. Different sizes of sheets are an indispensable and efficient processing method for sheet metal processing. The assembly line can be added into its own code system at the back of the unit, and the next good wafer can be collected into material magazines. The left and right yaw feeders are the most commonly used conveyor materials equipment in heavy industry and light industry. Now many manufacturers are Using left and right yaw feeders to improve the efficiency of the factory, then, what are the advantages of the left and right yaw type feeders? The following Xiaobian Profiles The left and right yaw feeders mainly have the following advantages:

First, the equipment is easy to operate and has a high degree of automation:

In the stamping production process, the left-right yaw feeder only needs to input the thickness and width of the material, the diameter of the blanking disc, the feeding step, and other parameters on the touch screen of the device, and then the feeding distance and the stamping distance can be calculated. Simple, truly fully automated operation.

Second, the material accuracy is high, the error controllable range is small:

Left and right yaw feeder adopts three-edge PLC to control the electronic control system of the equipment. The motor system is connected with the pulley of the feeder roller to achieve accurate control of the feed roller. Another set of servo motor system is synchronized with the precision roller screw. Belt connection to achieve precise left and right shift control. In the process of continuous wafer punching of left and right yaw feeders, the minimum distance between wafer corners can be set within 0.5mm, and the device error can be controlled within plus or minus 0.008mm, which can meet the stamping production of high-precision materials. .

Third, two-way shift alternately feeding, high efficiency, cost savings:

The left and right yaw feeders can randomly adjust the setting of the shifting parameters according to the diameter of the stamping discs to ensure that round and round cutting type blanking can be used to maximize the use of materials and save the production cost, and the equipment can be based on the size of the stamping wafers. The difference is that the calculation of the arrangement angle is performed automatically to ensure maximum material savings.

Fourth, the use of a wide range of applicable material types:

The left and right yaw feeders are suitable for punching and feeding sheets of various thin plates and thick plates. The material thickness range is generally 0.3-3.0mm, the maximum width of the material can reach 1800mm, and the maximum diameter of blanking discs can reach 1000mm. The left and right yaw feeders are also available in a wide variety of materials, such as various steel, copper, aluminum, cold rolled plates, and various special metals. The wafer stamping effect is also very obvious.