Contact: Liang Sheng
Tel: +86 (0769) 8287 2593
Mobile: +86 13712941678
Fax: +86 (0769) 8133 4403
E-mail: sanyi@dgsanyi.cn
Address: No. 2, Quanhe Street, Quantang Management District, Liaobu Town, Dongguan, China
Website: www.dgsanyi.cn
High-speed slicer failure how to repair?
1 The motor does not run after power on
Reasons: 1 poor power contact or loose plug; 2 bad switch contact
Maintenance methods: 1 repair the power or replace the plug; 2 repair or replace the same size switch
2 Slices are uneven, dull and produce more powder
Reasons: 1 blade is not sharp; 2 slice material hardness is too high; 3 slice of material sticks to the knife edge; 4 uneven force
Maintenance methods: 1 Remove the blade with a sharp grindstone; 2 Slice the material to soften; 3 Remove the blade to grind the paste; 4 Force evenly when slicing
3 The motor stops when working
Reasons: 1 feed too much, the cutter stuck; 2 switch bad contact
Maintenance method: 1 look under the cutter, remove the stuck material; 2 switch contact adjustment or exchange switch
Online Service
