There are many kinds of feeders, such as servo feeders, roller feeders, and feeder feeders. What are the characteristics and advantages of these feeders in these feeders? The following is a brief introduction by Dongguan Sanyi Intelligent Equipment Co., Ltd. for everyone:

First, the NC servo feeder debugging, operation is more simple, less labor intensity, increase the effective working time. Roller feeder must be used before the use of the actual match mold for inch test machine, debug the material width, thickness, feeding step can be continuous stamping production, and step adjustment is one of the most important part, roller feeding The adjustment of the machine step needs to adjust the eccentric disc installed on the output shaft of the press, which is not only cumbersome to adjust, but also due to the effect of clearance and brake inertia on the output shaft, after adjusting the inch step, it is necessary to repeatedly adjust according to actual experience. To achieve the actual continuous stamping required step, this work must be completed by professional and technical personnel, while the NC feeder does not need to consider so many factors, just set in Jin Zhide 7-inch Welen touch screen You can set simple, save time and energy.

Second, multi-stage feeding, to meet the needs of diversified production. The customer's production demand is not a layer of change. Many times, it needs to use multi-stage stamping technology. This kind of technology can only be satisfied by the NC feeder.

Three: The NC servo feeder has a wider scope of application and a higher degree of customization. Roller feeders and NC servo feeders are generally referred to as general-purpose mainstream feeders, but their scope of application has certain limitations. In particular, roller feeders are limited by the transmission principle and have obvious matching requirements. Roller feeder First, the punch must have an output shaft, the second is the material width within 400mm, thickness within 3.5mm, feeding step below 300mm, and there is no custom-made models, and NC feeder is completely without such restrictions The maximum width is up to 1500mm and the thickness up to 6.0mm. It is completely independent of the step size and the punch press. According to the actual stamping characteristics, there are powerful NC feeders and yaw type NC feeders for customers to choose from. .

Fourth, NC servo feeder feeding accuracy, better stability. The roller feeder adopts mechanical transmission. Due to the influence of various factors such as the clearance of the output shaft and the coordination of the transmission components, the feeding precision can only be guaranteed within ±0.05mm, while the NC feeder is different, and the servomotor is synchronized. The belt pulley directly drives the feed roller, which provides signals from the punch cam to release and feed the material. The material feeding is precise and synchronous, and is not interfered by external factors. The feed accuracy can be within ±0.02mm, even at short-distance and high-speed feeding. Up to ±0.01mm.